Fascination Technology How Jellyfish and Zinc Oxide Repair Joints

Source: University of Kiel | Translated by AI 3 min Reading Time

Related Vendors

In our “Fascination Technology” section, we present pioneering R&D projects every week. Today: How researchers in Kiel want to repair worn joint cartilage using jellyfish collagen and zinc oxide.

Stock image: a box jellyfish. For the AeroMarK and QPiezoR research projects, the researchers use collagen from another jellyfish species.(Source:  Kerstin Meurisch, Kiel University)
Stock image: a box jellyfish. For the AeroMarK and QPiezoR research projects, the researchers use collagen from another jellyfish species.
(Source: Kerstin Meurisch, Kiel University)

When joints are exposed to dynamic impact and shear forces while walking or running, hyaline cartilage acts as the perfect, extremely low-friction shock absorber. After an injury or in the case of osteoarthritis, however, the biomechanics of the human body face a problem: in adulthood, cartilage tissue scarcely regenerates on its own.Until now, the body has made do with an emergency solution by forming fibrocartilage—an emergency repair tissue that glides much less well and cannot withstand compressive loads in the long term. 

A research team led by Prof. Rainer Adelung at Kiel University (CAU) is now taking a completely new route in materials science: Using a combination of jellyfish collagen and tetrapodal zinc oxide, the researchers are developing two scaffold materials that specifically induce cartilage cells to rebuild genuine hyaline cartilage. The Federal Ministry for Research, Technology and Space (BMFTR) is funding the two projects “AeroMarK” and “QPiezoR” with a total of around 1.5 million euros (approx. 1.7 USD).

Scanning electron microscopy image of the collagen-coated tetrapods from the AeroMarK project.(Source:  Kolja Krone, Kiel University)
Scanning electron microscopy image of the collagen-coated tetrapods from the AeroMarK project.
(Source: Kolja Krone, Kiel University)

The Molecular Trick: Why Jellyfish Collagen is Superior

Collagen serves mammals and jellyfish alike as a structural scaffold protein. However, for the development of biomedical materials, the collagen of evolutionarily ancient cnidarians has a decisive, astonishing advantage: it lacks specific binding sites where human cartilage cells normally dock.What sounds like an incompatibility solves a central problem in tissue engineering: 

  • Behavior on mammalian collagen: cartilage cells attach, elongate mechanically and lose their functional specialization. The result is the undesired fibrocartilage.
  • Behavior on jellyfish collagen: Since the anchorage points are missing, the cells remain spherical. In preliminary work, Dr. Judith Sewing was able to show that it is precisely this round cell morphology that is the fundamental biological prerequisite for the cells to synthesize high-quality hyaline cartilage.

Materials Architecture with Zinc Oxide Tetrapods

To build mechanically defined 3D scaffolds from collagen, Adelung’s team combines the protein with tetrapodal zinc oxide (t-ZnO). These microscopic crystals have four arms and interlock on their own to form three-dimensional, highly porous networks. In Kiel, the material is now being tested in two different process variants:

  • In the “AeroMarK” project, the tetrapodal zinc oxide serves merely as a temporary sacrificial template to define the later 3D geometry. To this end, the researchers mix dissolved jellyfish collagen with the four-armed crystals, freeze-dry the mixture, and crosslink the collagen into a stable composite. The zinc oxide is then completely chemically dissolved out—what remains is an ultralight, highly porous aeromaterial made of pure collagen. By adjusting the mixing ratio and the crosslinking, this pore framework can be precisely tailored in stiffness and cavity size. By 2028, the team aims to develop multilayer gradient scaffolds from it that accurately replicate the complex micromechanical structure of natural articular cartilage.
  • In the parallel project “QPiezoR”, the researchers take the opposite approach: here, the zinc oxide tetrapods remain permanently in the collagen composite and assume an active functional role as piezoelectric signal emitters. Since zinc oxide responds to pressure and deformation, it directly converts the mechanical peak loads acting on the joint with every step into local electrical microsignals. The scaffold thus functions as an active smart material: the bioelectric stimuli are intended to dynamically stimulate the cartilage cells and specifically encourage them to divide and to form new cartilage tissue.

From the Laboratory to the Industrial Chain

Technology transfer is structured from the outset: the industrial large-scale synthesis of nanostructured t-ZnO is carried out via the CAU spin-off Phi-Stone AG. The medical technology company AMIPLANT is responsible for subsequent medical approval and manufacturing as an implantable cartilage patch.Until the first implantation in humans, preclinical studies are still required—but the project impressively demonstrates how the merging of marine materials biology and nanotechnology provides solutions to wear problems that conventional surgery has so far reached its limits in addressing.

Subscribe to the newsletter now

Don't Miss out on Our Best Content

By clicking on „Subscribe to Newsletter“ I agree to the processing and use of my data according to the consent form (please expand for details) and accept the Terms of Use. For more information, please see our Privacy Policy. The consent declaration relates, among other things, to the sending of editorial newsletters by email and to data matching for marketing purposes with selected advertising partners (e.g., LinkedIn, Google, Meta).

Unfold for details of your consent